Hard water in Surrey: what limescale does to your boiler
The short answer
Most of Surrey and east Berkshire has hard water, which leaves limescale inside boilers, showers and taps. In a combi boiler it builds up in the heat exchanger, causing noise, poor hot water and early breakdowns. A scale reducer on the incoming mains, plus a yearly service, is the cheapest way to protect it.

Why Surrey water is so hard
Much of our water comes from chalk and limestone aquifers. As rainwater passes through the rock it picks up calcium and magnesium. That is what makes water "hard", and it is why kettles across Surrey Heath, Woking and Guildford fur up so quickly.
What limescale does inside a boiler
When hard water is heated, the minerals come out as scale. In a combi boiler, the hot water heat exchanger is where it collects. As it builds up, the boiler has to work harder to heat the same water.
- Hot water that runs hot then cold, or never gets properly hot
- Kettling or rumbling noises from the boiler
- Higher gas bills for the same use
- Heat exchanger and diverter valve failures earlier than expected
How to protect your boiler
- Scale reducer. Building regulations guidance calls for scale protection on combi boilers in hard water areas. We fit one on new installations where needed, and can add one to an existing boiler.
- Annual service. An engineer can spot early signs of scale and deal with them before they cause a breakdown.
- Water softener. A whole-house softener protects everything, though it is a bigger investment. Keep one unsoftened tap for drinking water.
- Shower heads and taps. Soak shower heads in descaler or white vinegar every few months to keep the flow up.

